| size: | (L x W x H)120mm x 75mm x 30mm |
| weight: | approx. 250g |
| power supply: | alkaline battery 9V (automatic low – battery indicator) |
| working temperature: | 0°C to + 60°C |
The manufacturer and exporter of quality equipment for veterinarians and dog breeders since 1987
Popular Tags
Technical data – Pregnancy Detector for dogs
FAQ – DRAMINSKI Pregnancy Detector for dogs
Frequently Asked Questions
How can I check if my instrument operates properly?
- connect the probe with the instrument using a provided cable and turn the instrument on (a green light should appear)
- wet the probe head with water and press it to the inner side of the palm (in the thumb’s base); you should hear even sounds (at 1-sec intervals) and the green light should blink at the same frequency. It is a signal of good contact.
- immerse the probe head in a container with water – sound and light signals should increase their frequencies. It is a “pregnancy” signal – in this case it is the reflection of waves from the water in the container.
What is the rule behind the Pregnancy Tester?
The tester detects the presence of amniotic fluid in the uterus. It uses a phenomenon of ultrasound wave reflection. The probe which is placed on the female body sends a beam of ultrasounds which reflects from the uterus horns filled with fluid and returns, causing a change in the signal generated by the instrument.
Technical service
The main principle in our manufacturing process is to maintain the highest quality and thus to provide maximum lifetime efficiency of the offered equipment.
DRAMIŃSKI Company provides fast and efficient service for our clients in the guarantee period (pursuant to the entry on guarantee card) and offers open-ended post-guarantee service, including modernisation of equipment. We guarantee delivery of service within 48 hours from the receipt of shipment.
In case the exploited equipment needs to be serviced, we offer the simplest way and the lowest costs.
Please send the equipment to DRAMIŃSKI Company via post (upon confirmation of receipt) to the following address:
DRAMIŃSKI
ul. Owocowa 17
10-860 Olsztyn.
Only then may you be confident that the equipment reaches its destination without problems. After service, the equipment will be sent to the address provided.
Yet it is not always necessary to send the used equipment. A short telephone conversation may be enough to convey a number of remarks to our servicemen. Many causes of temporary problems may be resolved via telephone. Should you have any questions or doubts, we await your comments on telephone number: 089 527 11 30.
As a manufacturer, we are always at the disposal of our equipment users.